想在《Journal of Energy Chemistry》雜志實現快速發表，需要遵循一定的策略和步驟。

以下是一些建議，具體策略如下：

1.?選擇合適的期刊

了解期刊要求：《Journal of Energy Chemistry》雜志要求投稿內容與化學領域相關，確保論文主題符合雜志的定位，主要欄目有研究論文、研究快訊、綜述、簡訊、會議介紹和國內外著名的從事能源化學研究機構的簡介等等。

關注審稿周期：《Journal of Energy Chemistry》雜志的審稿周期預計：預計1-3個月。

2.?提高論文質量

內容質量：確保論文內容新穎、觀點明確、數據可靠，避免與已有文獻重復。

嚴格按照《Journal of Energy Chemistry》雜志投稿要求準備稿件：

Preparation of manuscripts (Template)

The manuscripts should be printed on good quality A4 paper in a 12 pt Times New Roman font. All manuscripts should include: a title, list of authors, full addresses of authors, an abstract, keywords, all sections of the body of the manuscript, footnotes, and references.

The title should clearly and accurately indicate the contents of the article or communication and should be expressed in adequate scientific terms. No abbreviations should be used in the title.

The full addresses of authors should be placed below the title. 

Footnotes should be included on the first page to give the phone number, fax number, and e-mail address of the author of correspondence, and if applicable, information regarding funding. 

We request that authors should submit abstracts for both articles and communications. Abstracts should state briefly the reason for the work, the significant results, and conclusions.

Keywords should be given at the bottom of the abstract to serve as guidelines for indexing.

The body of the manuscript should be subdivided into the following sequence of the sections: Introduction, Experimental, Results and discussion, Conclusions, and References.

Tables and figures must be numbered consecutively with Arabic numerals and should be self-explanatory. Tables must have a brief descriptive title and include footnotes if necessary.“Figure” should be spelled out instead of being written“Fig.” Figures should have figure captions, either with the figures or collected on a separate sheet. The contents of figures, tables, and word descriptions should not be duplicated.Important instructions concerning Figures and Tables are listed as follows:

Each figure should be located at bottom of the paragraph where it is mentioned first in the text.

Size and font of all words including the X and Y axis, units and legends are 7.5 pt and Times New Roman, respectively. The first letter in the first word is capitalized.

Physical quantity is in italic, and the physical quantity and unit is separated by /not by · or blank, such as T/K，Ea/eV，Z/Ω, mL/min, mL/(h?gcat). When English full name of physical quantity is used, unit should be placed in the parenthesis and there is one blank space between them, such as Potential (V)，Capacity (mAh/g)，Current efficiency (%).

Digit and unit is separated by one blank space. Percentage of weight and volume should be wt% and vol%, not wt.% and vol.%.

Width of figures or images is 8 cm (single column) or 16 cm (double column).

For digital figures, they should be edited in the text. For SEM, TEM, HR-REM images or other photos, their resolution is more than 300dpi

When a figure title contains a few different figures, each figure should be numbered using (a), (b), (c), (d) …… which are inserted in the upper left corner of each figure with closed frame. When a figure contains different lines, these lined should be numbered using (1), (2), (3), (4) …… even though the lines are also differentiated by different colors. 

Table must be three-lined format.

 Photographs should be of sufficiently high quality with respect to detail and contrast. Indicate the magnification by a bar on the photograph.

References should be numbered consecutively in the order in which they are first mentioned in the text. Abbreviations of journal titles should follow the style used in Chemical Abstracts. Reference accuracy is critical and authors are responsible for the accuracy of the references. Only articles that have been published or are in press should be included in the references. Journal articles and books must be cited by the following formats:

Reference to a journal publication:

[1] J. van der Geer, J.A.J. Hanraads, R.A. Lupton, J. Sci. Commun. 163 (2000) 51–59. 

Reference to a book:

[2] W. Strunk Jr., E.B. White, The Elements of Style, third ed., Macmillan, New York, 1979. 

Reference to a chapter in an edited book:

[3] G.R. Mettam, L.B. Adams, in: B.S. Jones, R.Z. Smith (Eds.), Introduction to the Electronic Age, E- Publishing, Inc., New York, 1994, pp. 281–304.

 All manuscripts should include a graphic abstract. Authors are required to provide a single separate A4 sheet containing a small diagram, or other informative illustration (scheme, formula, figure, etc.) that shows the most important aspect of the paper. The diagram or illustration should be a maximum size of 40 mm high×80 mm wide with color. Style and format of the graphical abstract may be found in the example.

3.?優化投稿流程

網絡投稿：通過《Journal of Energy Chemistry》雜志的官方網站進行投稿，確保所有信息填寫準確。

快速通道：部分期刊提供快速通道服務，可以縮短審稿和發表周期，但通常需要額外付費。

4.?積極應對審稿意見

及時關注審稿進度、與審稿人溝通、耐心等待錄用通知，通過遵循這些建議，作者可以提高論文的發表效率并增加被錄用的機會。

《Journal of Energy Chemistry》是由中國科學院大連化學物理研究所;中國科學院成都有機化學研究所主辦的期刊。

《Journal of Energy Chemistry》獲獎情況：四川省質量一級期刊

《Journal of Energy Chemistry》在報道世界范圍內天然氣化學及其相關領域的最新發展動態和科技信息，增進國際交流，促進科技發展。以天然氣及其相關領域從事化學和化學工程方面研究的科研人員及工程技術人員、大專院校的本科生、研究生和教師等為讀者對象。

《Journal of Energy Chemistry》主要報道化石能源優化利用、氫能的研究與利用、電化學能轉化與儲存、二氧化碳捕獲、儲存與化學利用、能源利用中的材料和納米技術、生物質轉化和光催化中相關的化學問題。

綜上所述，《Journal of Energy Chemistry》雜志是一本具有較高學術水平和影響力的化學類期刊，它為廣大化學工作者提供了一個展示研究成果、交流化學思想的平臺。

《Journal of Energy Chemistry》雜志往年文章平均引文率

聲明：本信息依據互聯網公開資料整理，若存在錯誤，請及時聯系我們及時更正。